Command Reference Guide

190 ● ip count exterior threshold 3Com Router 5000 Family and Router 6000 Family
Command Reference
ip count exterior threshold
Purpose Use the ip count exterior-threshold command to configure maximum
number of entries in the exterior hash table, with each entry for an IP packet that
does not match any IP accounting rule.
Use the undo ip count exterior-threshold command to restore the default
value, that is, 0. When doing this, you are prompted to clear the table first if the
number of entries that already existed in the table exceeds the default.
Syntax ip count exterior-threshold number
undo ip count exterior-threshold
Parameters number
Maximum number of entries in the exterior hash table.
Valid values are 0 to 8192.
Default By default, maximum number of entries in the exterior hash table is 0.
Example Set maximum number of entries in the exterior hash table to 100.
[3Com] ip count exterior-threshold 100
Restore the default maximum number of entries in the exterior hash table.
[3Com] undo ip count exterior-threshold
View This command can be used in the following views:
■ System view