Command Reference Guide

184 ● ip address dhcp-alloc 3Com Router 5000 Family and Router 6000 Family
Command Reference
ip address dhcp-alloc
Purpose Use the ip address dhcp-alloc command to enable DHCP client on the
Ethernet or WAN interface for obtaining local IP address.
Use the undo ip address dhcp-alloc command to disable DHCP client.
Syntax ip address dhcp-alloc
undo ip address dhcp-alloc
Parameters None
Default By default, DHCP client is disabled.
Example Enable DHCP client on Ethernet0/0/0.
[3Com-Ethernet0/0/0] ip address dhcp-alloc
View This command can be used in the following views:
■ Interface view (Ethernet interface or subinterface, synchronous/asynchronous
serial interface encapsulated with PPP, HDLC, or frame relay, E1 interface)
Description Currently this command is available on following interfaces:
■ Ethernet interface (subinterface)
■ Synchronous/asynchronous serial interface encapsulated with PPP, HDLC, or frame
relay
■ E1 interface