Command Reference Guide

3Com Router 5000 Family and Router 6000 Family ip address bootp-alloc ● 183
Command Reference
ip address bootp-alloc
Purpose Use the ip address bootp-alloc command to configure the Ethernet interface
to obtain IP address using BOOTP.
Use the undo ip address bootp-alloc command to disable the Ethernet
interface to obtain IP address using BOOTP.
Syntax ip address bootp-alloc
undo ip address bootp-alloc
Parameters None
Default By default, the Ethernet interface does not obtain IP address using BOOTP.
Example Configure interface Ethernet 0/0/0 to obtain IP address using BOOTP.
[3Com-Ethernet 0/0/0] ip address bootp-alloc
View This command can be used in the following views:
■ Ethernet Interface view