Command Reference Guide

180if-match packet length 3Com Router 5000 Family and Router 6000 Family
Command Reference
if-match packet length
Purpose Use the if-match packet-length command to set length match conditions of
IP packets.
Use the undo if-match packet-length command to delete the configuration
about IP packet length match conditions.
Syntax if-match packet-length min-len max-len
undo if-match packet-length
Parameters min-len
Minimum size of network layer packets. Valid values
are 0 to 2147483647.
max-len
Maximum size of network layer packets. Valid values
are 0 to 2147483647.
Example Set the packet in the range 100 to 200 to be matched.
[3Com] route-policy map1 permit node 10
[3Com-route-policy] if-match packet-length 100 200
View This command can be used in the following views:
Route-Policy view
Related Command if-match acl