Command Reference Guide

3Com Router 5000 Family and Router 6000 Family display debugging ● 93
Command Reference
display debugging
Purpose Use the display debugging command to view the enabled debugging switches.
Syntax display debugging [ interface interface-type interface-number] [
module-name ]
Parameters module-name
Module name.
interface-type
Interface type.
interface-number
Interface number.
Default By default, no parameters are defined and all the enabled debugging switches are
displayed.
Example Display all the enabled debugging switches.
<3Com> display debugging
IP packet debugging switch is on.
View This command can be used in the following views:
■ Any view
Related Command debugging