Command Reference Guide

174 ● gateway-list 3Com Router 5000 Family and Router 6000 Family
Command Reference
gateway-list
Purpose Use the gateway-list command to configure IP addresses of the egress GW
routers used by DHCP clients.
Use the undo gateway-list command to delete the configuration.
Syntax gateway-list ip-address [ ip-address ]
undo gateway-list { ip-address | all }
Parameters ip-address
IP address of egress GW router. You can configure up
to eight IP addresses separated by spaces in a
command.
all
IP addresses of all the egress GW routers.
Default By default, no egress GW router is configured.
Example Associate the egress GW router at 10.110.1.99 with DHCP address pool 0.
[3Com] dhcp server ip-pool 0
[3Com-dhcp-0] gateway-list 10.110.1.99
View This command can be used in the following views:
■ DHCP Address Pool view
Related Commands ■ dhcp server ip-pool
■ network