Command Reference Guide

3Com Router 5000 Family and Router 6000 Family display nat ● 155
Command Reference
display nat
Purpose Use the display nat command to display the configuration of address translation.
Syntax display nat { address-group | aging-time | all | outbound | server |
statistics | session [ vpn-instance vpn-instance-name ] [ slot
slot-number ] [source global global-addr | source inside inside-addr ]
[ destination ip-addr ] }
Parameters address-group
Displays the information of the address pool.
aging-time
Displays the effective time for NAT connection.
all
Displays all the information about NAT.
outbound
Displays the information of the outbound NAT.
server
Displays the information of the internal server.
statistics
Displays the statistics of current NAT records.
session
Displays the information of the currently activated
connection.
vpn-instance
vpn-instance-name
Displays the NAT table items of a special VPN. The
omission of this parameter means that NAT items for
all VPNs will be listed out.
slot slot-number
Designates the slot number of an interface. This
parameter is reserved especially for distributed
environment use.
source global global-addr
Only displays the NAT entry with address as
global-addr after NAT.
source inside inside-addr
Only displays the NAT entry with internal address as
inside-addr.
destination ip-addr
Displays the NAT table items of a special IP destination.
Example Display all the information about address translation.
<3Com> display nat session
Protocol GlobalAddr Port InsideAddr Port DestAddr
Port
- 172.18.65.55 --- 1.1.1.1 --- --- ---
VPN: 0, status: NOPAT, TTL: 00:04:00, Left:
00:00:33