Command Reference Guide

150 ● display ip policy statistic 3Com Router 5000 Family and Router 6000 Family
Command Reference
display ip policy statistic
Purpose Use the display ip policy statistic command to view the statistics of
policy routings.
Syntax display ip policy statistic { local | interface interface-type
interface-number }
Parameters local
Displays the statistics of local policy routing packets.
interface
Displays the statistics of interface policy routings.
interface-type
Interface type.
interface-number
Interface number.
Example Display statistics about policy routing matches on the specified interface.
<3Com> display ip policy statistic interface ethernet0/0/0
Interface Ethernet0/0/0 policy routing information:
Route-policy: aaa
permit node 5
apply output-interface Serial1/0/0
Denied: 0,
Forwarded: 0
Total denied: 0, forwarded: 0
The above information shows the forwarding success and failure times
for all the forwarding policies (that is, the apply clause) of policy
routing on interface ethernet0/0/0.
View This command can be used in the following views:
■ Any view