Command Reference Guide

148 ● display ip policy 3Com Router 5000 Family and Router 6000 Family
Command Reference
display ip policy
Purpose Use the display ip policy command to view the routing policies of local and
configured interface policy routings.
Syntax display ip policy
Parameters None
Example Display the routing policies of the local and configured interface policy routings.
<3Com> display ip policy
Route-policy Interface
pr02 Local
pr02 Virtual-Template0
pr01 Ethernet 0/0/0
The first line is prompt information. The first row shows where is used
the routing policy indicated in the second row. Take the first line as
an example, "local" indicates that the policy routing is used on the
local router, that is, all packets sent from the local router (not
forward through it) using the policy routing "pr02". The second and
third lines represent that the interfaces virtual-template0 and
Ethernet0/0/0 use route policy pr02 and pr01 respectively.
View This command can be used in the following views:
■ Any view
Description This command is used to display the routing policies of local and configured interface
policy routings.