Command Reference Guide

3Com Router 5000 Family and Router 6000 Family display fib ● 129
Command Reference
display fib
Purpose Use the display fib command to view the summary of the Forwarding
Information Base.
Syntax display fib
Parameters None
Example Display the summary of the forwarding information base.
<3Com> display fib
Flag:
U: Usable G:Gateway H:Host B:Blackhole D:Dynamic
S:Static
R:Reject E:Equal cost multi-path L:Generated by ARP or ESIS
Destination/Mask Nexthop Flag TimeStamp Interface
196.1.1.0/24 220.1.1.2 GU t[418913] Vlan-interface1200
195.1.1.0/24 220.1.1.2 GU t[418913] Vlan-interface1200
194.1.1.0/24 220.1.1.2 GU t[418913] Vlan-interface1200
193.1.1.0/24 220.1.1.2 GU t[418913] Vlan-interface1200
192.1.1.0/24 220.1.1.2 GU t[418913] Vlan-interface1200
191.1.1.0/24 220.1.1.2 GU t[418913] Vlan-interface1200
190.1.1.0/24 220.1.1.2 GU t[418913] Vlan-interface1200
189.1.1.0/24 220.1.1.2 GU t[418913] Vlan-interface1200
188.1.1.0/24 220.1.1.2 GU t[418913] Vlan-interface1200
187.1.1.0/24 220.1.1.2 GU t[418913] Vlan-interface1200
186.1.1.0/24 220.1.1.2 GU t[418913] Vlan-interface1200
View This command can be used in the following views:
■ Any view
Description This command outputs the Forwarding Information Base in a list, in which each line
represents one route. The following points are included:
■ Destination address/mask length
■ Next hop
■ The current flag, which is expressed in the combination of G, H and U. G
represents Gateway, H is Host (host route), and U is UP (available).
■ Time stamp
■ Outbound interface