Command Reference Guide

3Com Router 5000 Family and Router 6000 Family display channel ● 87
Command Reference
display channel
Purpose Use the display channel command to view the contents in an information
channel.
Syntax display channel [ channel-number | channel-name ]
Parameters channel-number
Channel number. Valid values are 0 to 9. (The system
has 10 channels.)
channel-name
Channel name.
Example Display the contents in information channel 0.
<3Com> display channel 0
channel number:0, channel name:console
MODU_IDNAME ENABLELOG_LEVELENABLETRAP_LEVEL ENABLEDEBUG_LEVEL
ffff0000allY warningYdebugging Ydebugging
View This command can be used in the following views:
■ Any view
Table 7 Channel names and their associated channel numbers
Channel name Information channel number
channel6 6
channel7 7
channel8 8
channel9 9
console 0
logbuffer 4
loghost 2
monitor 1
snmpagent 5
trapbuffer 3
Table 8 Description on the fields of the display channel command
Field description
channel number:0 Channel number
channel name:console Channel name
MODU_ID Module ID
NAME Module name
ENABLELOG_LEVEL State of log-level log is enable
ENABLETRAP_LEVEL State of trap-level log is enable
ENABLEDEBUG_LEVEL State of debug-level log is enable