Command Reference Guide

114 ● display dhcp relay address 3Com Router 5000 Family and Router 6000 Family
Command Reference
display dhcp relay address
Purpose Use the display dhcp relay address command to view the DHCP relay
address configuration of an interface.
Syntax display dhcp relay address [ interface interface-type interface-num |
all ]
Parameters interface-type
interface-num
Specifies an interface by its type and number.
all
All the interfaces.
Example View the DHCP relay address configurations of all the interfaces.
<3Com> display dhcp relay address all
** Ethernet11/2/0 DHCP Relay Address **
Relay Address [0] : 3.3.3.3
View This command can be used in the following views:
■ Any view
Related Commands ■ ip relay address (Interface view)
■ ip relay address interface (System view)