Command Reference Guide

110 ● display connection-limit statistics 3Com Router 5000 Family and Router 6000 Family
Command Reference
display connection-limit statistics
Purpose Use the display connection-limit statistics command to display the
connection limit statistics.
Syntax display connection-limit statistics [ source source-addr
source-wildcard ] [ destination destination-addr destination-wildcard
] [ destination-port { { eq | neq | gt | lt } destination-port | range
destination-port1 destination-port2 } ] [ vpn-instance vpn-name ]
Parameters source
Specifies source IP address
source-addr
Source IP address
source-wildcard
Wildcard of source IP address
destination
Specifies destination IP address
destination-addr
Destination IP address
destination-wildcard
Wildcard of destination IP address
all
Displays statistics of all connections
destination-port
Specifies destination port number
eq
Displays the connection number of services whose
destination port number equals to the specified port
number
neq
Displays the connection number of services whose
destination port number does not equal to the
specified port number
gt
Displays the connection number of services whose
destination port number is greater than the specified
port number
lt
Displays the connection number of services whose
destination port number is less than the specified port
number
range
Displays the connection number of services whose
destination port number is within specified range
destination-port1
Destination port number
destination-port1,
destination-port2
Paramaters when displayed in the port range,
indicating the upper limit and lower limit of service
port respectively.
vpn-instance
Specifies VPN instance
vpn-name
Name of the VPN instance