Command Reference Guide

108 ● display bootp client 3Com Router 5000 Family and Router 6000 Family
Command Reference
display bootp client
Purpose Use the display bootp client command to display information about the
BOOTP client, such as MAC address and IP address.
Syntax display bootp client [ interface interface-type interface-number ]
Parameters interface interface-type
interface-number
Specifies an interface by its type and number.
Example Display information about the BOOTP client.
[3Com] display bootp client interface ethernet0/0/0
Interface ethernet0/0/0:
Allocated IP: 169.254.0.2 255.255.0.0
Transaction ID = 0x3d8a7431
Mac Address 00e0-fc0a-c3ef
View This command can be used in the following views:
■ Any view
Table 3 Description on the fields of the display bootp client command
Field Description
Interface ethernet0/0/0 Ethernet 0/0/0 interface is configured to obtain IP address from a
BOOTP server.
Allocated IP IP address obtained from the BOOTP server
Transaction ID XID field in the BOOTP packet
Mac Address MAC address of the BOOTP client