Command Reference Guide

3Com Router 5000 Family and Router 6000 Family display arp ● 105
Command Reference
display arp
Purpose Use the display arp command to view the ARP mapping table.
Syntax display arp [ static | dynamic | all | | { begin text | exclude text |
include text } ]
Parameters static
Indicates to show the static ARP entries.
dynamic
Indicates to show the dynamic ARP entries.
all
Indicates to show all ARP entries.
|
Outputs the matched entries.
begin
Matches the strings beginning with the regular
expression.
exclude
Matches the strings that exclude the regular
expression.
include
Matches the strings that include the regular
expression.
text
Regular expression.
Default By default, all the ARP entries of the RSU are displayed.
Example Display all ARP entries.
<3Com> display arp
Type: S-Static D-Dynamic
IP AddressMAC AddressTypeVpn-instance NameInterface
1.1.1.10012-0012-0012S
10.153.72.200e0-fc00-0007D Eth0/0/1
Display static ARP entries.
<3Com> display arp static
Type: S-Static D-Dynamic
IP Address MAC AddressTypeVpn-instance NameInterface
1.1.1.10012-0012-0012S
Display dynamic ARP entries.
<3Com> display arp dynamic
Type: S-Static D-Dynamic
IP AddressMAC AddressType Vpn-instance Name Interface
10.153.72.2 00e0-fc00-0007D Eth0/0/1
View This command can be used in the following views:
■ Any view