Command Reference Guide

104 ● dhcp server voice-config interface (System view) 3Com Router 5000 Family and Router 6000 Family
Command Reference
Example Enable the DHCP server to send option 184 and its suboptions when assigning
addresses from interface Ethernet 0/0/1, setting IP address of NCP to 1.1.1.1, IP
address of the alternate NCP server to 2.2.2.2, state of voice VLAN to enable, ID of
voice VLAN to 1, IP address for failover call routing to 3.3.3.3, and dial string for
failover call routing to 99*.
<3Com> system-view
[3Com] dhcp select interface ethernet 0/0/1
[3Com] dhcp server voice-config ncp-ip 1.1.1.1 interface ethernet 0/0/1
[3Com] dhcp server voice-config as-ip 2.2.2.2 interface ethernet 0/0/1
[3Com] dhcp server voice-config voice-vlan 1 enable interface ethernet
0/0/1
[3Com] dhcp server voice-config fail-over 3.3.3.3 99* interface
ethernet 0/0/1
View This command can be used in the following views:
■ System view
Description The DHCP server sends option 184 and suboptions of 184 only when thus required by
the DHCP client.
Configure the NCP-IP suboption before configuring other suboptions; otherwise, they
cannot take effect.
Related Command voice-config