Command Reference Guide

3Com Router 5000 Family and Router 6000 Family dhcp server voice-config interface (System view) ● 103
Command Reference
dhcp server voice-config interface (System
view)
Purpose Use the dhcp server voice-config interface command to enable the
DHCP server to send option 184 and suboptions of 184 when it assigns addresses
from the specified interface address pool.
Use the undo dhcp server voice-config command to disable the DHCP
server to send option 184 and suboptions of 184 when it assigns addresses from the
specified interface address pool.
Syntax dhcp server voice-config { ncp-ip ip-address | as-ip ip-address |
voice-vlan vlan-id { enable | disable } | fail-over ip-address
dialer-string } { all | interface interface-type interface-number [ to
interface-type interface-number ] }
undo dhcp server voice-config [ ncp-ip | as-ip | voice-vlan | fail-over
] { all | interface interface-type interface-number [ to interface-type
interface-number ] }
Parameters ncp-ip ip-address
Specifies the IP address of the network call processor
(NCP).
as-ip ip-address
Specifies the IP address of the alternate NCP server.
voice-vlan
Voice VLAN.
vlan-id
Voice VLAN ID. Valid values are 1 to 4094.
enable
Voice VLAN is in the enabled state.
disable
Voice VLAN is in the disabled state.
fail-over
Failover call routing.
ip-address
IP address for failover call routing.
dialer-string
Dial string for failover call routing, comprising digits in
the range of 0 to 9 and wildcard asterisk (*).
all
All interfaces or all suboptions.
interface-type
interface-number [ to
interface-type
interface-number ]
Indicates an interface or all interfaces from the first
specified interface to the second. Note that the
interfaces must be Ethernet interfaces (or
subinterfaces) or virtual Ethernet interfaces.
Default By default, the DHCP server does not support option 184 and its suboptions.