Command Reference Guide

3Com Router 5000 Family and Router 6000 Family dhcp server nbns-list interface (System view) ● 87
Command Reference
dhcp server nbns-list interface (System view)
Purpose Use the dhcp server nbns-list interface command in system view to
configure NetBIOS server addresses for the clients that get ip address from the DHCP
address pool of the interfaces in a specified range.
Use the undo dhcp server nbns-list interface command in system view
to delete the configuration.
Syntax dhcp server nbns-list ip-address [ ip-address ] { interface
interface-type interface-number [ to interface-type interface-number ]
| all }
undo dhcp server nbns-list { ip-address | all } { interface
interface-type interface-number [ to interface-type interface-number ]
| all }
Parameters ip-address
IP address of NetBIOS server. You can configure up to
eight IP addresses separated by spaces in a command.
all
In the undo form of the command, the first “all” refers
to all the NetBIOS server addresses and the second, all
the interfaces.
interface-type
interface-number [ to
interface-type
interface-number ]
Indicates an interface or all interfaces from the first
specified interface to the second. Note that the
interfaces must be Ethernet interfaces (or
subinterfaces) or virtual Ethernet interfaces.
Default By default, no NetBIOS address is configured.
Example In the DHCP address pool of interfaces in the range of Ethernet2/0/0.1 to
Ethernet2/0/0.5, assign the NetBIOS server at 10.12.1.99 to the clients.
[3Com] dhcp server nbns-list 10.12.1.99 interface ethernet 2/0/0.1 to
ethernet 2/0/0.5
View This command can be used in the following views:
■ System view