Command Reference Guide

86 ● dhcp server nbns-list (Interface view) 3Com Router 5000 Family and Router 6000 Family
Command Reference
dhcp server nbns-list (Interface view)
Purpose Use the dhcp server nbns-list command in interface view to configure
NetBIOS server addresses in the DHCP address pool of current interface.
Use the undo dns-list command in interface view to delete the configuration.
Syntax dhcp server nbns-list ip-address [ ip-address ]
undo dhcp server nbns-list { ip-address | all }
Parameters ip-address
IP address of NetBIOS server. You can configure up to
eight IP addresses separated by spaces in a command.
all
All the NetBIOS server IP addresses.
Default By default, no NetBIOS address is configured.
Example In the DHCP address pool of Ethernet1/0/0, allocate the NetBIOS server at 10.12.1.99
to the clients.
[3Com] interface ethernet 1/0/0
[3Com-Ethernet 1/0/0] dhcp server nbns-list 10.12.1.99
View This command can be used in the following views:
■ Ethernet Interface (or subinterface) view
Description By far, only up to eight NetBIOS addresses can be configured in each DHCP address
pool.
Related Commands ■ dhcp server ip-pool
■ dhcp server nbns-list interface (System view)
■ nbns-list
■ netbios-type