Command Reference Guide

3Com Router 5000 Family and Router 6000 Family dhcp server ip-pool ● 85
Command Reference
dhcp server ip-pool
Purpose Use the dhcp server ip-pool command to create a DHCP address pool and
access the DHCP address pool view.
Use the undo dhcp server ip-pool command to delete the specified address
pool.
Syntax dhcp server ip-pool pool-name
undo dhcp server ip-pool pool-name
Parameters pool-name
Address pool name uniquely identifying an address
pool, which is a string comprising at least one
character and 35 characters at most.
Default By default, no DHCP address pool is created.
Example Create DHCP address pool 0.
[3Com] dhcp server ip-pool 0
[3Com-dhcp-0]
View This command can be used in the following views:
■ System view
Description If the specified address pool has existed, executing the dhcp server ip-pool
command will directly access the DHCP address pool view. If the address pool does
not exist, the DHCP server will create it before accessing the DHCP address pool view.
Each DHCP server is allowed to configure multiple address pools. So far, you may
configure up to 128 global address pools on each DHCP server.
The subnet addresses and subnet broadcast addresses on the DHCP server do not
participate in address allocation.
Related Commands ■ dhcp enable
■ expired
■ network