Command Reference Guide

3Com Router 5000 Family and Router 6000 Family dhcp server dns-list ● 75
Command Reference
dhcp server dns-list
Purpose Use the dhcp server dns-list command in interface view to configure DNS IP
addresses for an interface configured with a DHCP address pool.
Use the undo dns-list command in interface view to delete the configuration.
Syntax dhcp server dns-list ip-address [ ip-address ]
undo dhcp server dns-list { ip-address | all }
Parameters ip-address
IP address of DNS. You can configure up to eight IP
addresses separated by spaces in a command.
Default By default, no DNS address is configured.
Example Configure the DNS server address 1.1.1.254 for the DHCP address pool of the
interface Ethernet1/0/0.
[3Com] interface ethernet 1/0/0
[3Com-Ethernet 1/0/0] dhcp server dns-list 1.1.1.254
View This command can be used in the following views:
■ Ethernet Interface (or subinterface) view
Description By far, only up to eight DNS server addresses can be set in each DHCP address pool.
Related Commands ■ dhcp server dns-list interface (System view)
■ dhcp server ip-pool
■ dns-list