Command Reference Guide

74 ● dhcp server detect 3Com Router 5000 Family and Router 6000 Family
Command Reference
dhcp server detect
Purpose Use the dhcp server detect command to enable pseudo-DHCP-server
detection.
Use the undo dhcp server detect command to disable the function.
Syntax dhcp server detect
undo dhcp server detect
Parameters None
Default By default, pseudo-DHCP-server detection is disabled.
Example Enable pseudo DHCP server detection.
[3Com] dhcp server detect
View This command can be used in the following views:
■ System view
Description If you configure this command on a DHCP client, when receiving a DHCP response
packet from the DHCP server, the client displays information about the DHCP server.
If you configure this command on a DHCP server, when receiving a DHCP request
packet, the server displays the DHCP server information carried by the packet.