Manualshelf

Command Reference Guide

ManualsBrandsHP ManualsRoutersHP 5000 Router Series
1241124212431244124512461247124812491250
3Com Router 5000 Family and Router 6000 Family dhcp enable ● 65
Command Reference
dhcp enable
Purpose Use the dhcp enable command to enable DHCP.
Use the undo dhcp enable command to disable DHCP.
Syntax dhcp enable
undo dhcp enable
Parameters None
Default By default, DHCP is enabled.
Example Enable DHCP on the current router.
[3Com] dhcp enable
View This command can be used in the following views:
■ System view
Description Before you can configure DHCP, you must enable DHCP. This configuration is essential
to both DHCP server and DHCP relay.
DHCP can operate normally only after you correctly set the system clock.