Command Reference Guide

64 ● dhcp accounting domain (Interface view) 3Com Router 5000 Family and Router 6000 Family
Command Reference
dhcp accounting domain (Interface view)
Purpose Use the dhcp server accounting domain command to enable DHCP
accounting for addresses from the interface address pool and configure a domain for
DHCP accounting.
Use the undo dhcp server accounting domain command to disable DHCP
accounting for addresses from the interface address pool.
Syntax dhcp server accounting domain domain-name
undo dhcp server accounting domain domain-name
Parameters domain-name
Domain for DHCP accounting. For this domain, a
RADIUS scheme must be configured.
all
Indicates all interfaces.
Default By default, DHCP accounting is not enabled.
Example Enable DHCP accounting for addresses from the interface address pool, and specify
radius_domain as the domain for accounting.
[3Com-Ethernet0/0/0] dhcp server accounting domain radius_domain
View This command can be used in the following views:
■ Interface view
Related Command accounting domain