Command Reference Guide

60 ● debugging udp packet 3Com Router 5000 Family and Router 6000 Family
Command Reference
debugging udp packet
Purpose Use the debugging udp packet command to enable the debugging of UDP
connection.
Use the undo debugging udp packet command to disable the debugging of
UDP connection.
Syntax debugging udp packet [ task_id socket_id ]
undo debugging udp packet [ task_id socket_id ]
Parameters task_id
The ID of a task.
socket_id
The ID of a socket.
Example Enable the debugging of UDP connection.
<3Com> debugging udp packet
<3Com> display debugging
*0.377770-SOCKET-8-UDP:
1043494431: Output: task = ROUT(6), socketid = 3,
src = 1.1.1.1:520, dst = 255.255.255.255:520, datalen = 24,
View This command can be used in the following views:
■ User view
Description The number of debugging switches users can enable is limited, that is, at the same
time only a fixed number of debugging switches can be enabled (combination of task
ID and socket ID).