Command Reference Guide

3Com Router 5000 Family and Router 6000 Family debugging udp-helper ● 59
Command Reference
debugging udp-helper
Purpose Use the debugging udp-helper command to enable UDP Helper debugging.
Use the undo debugging udp-helper command to disable UDP Helper
debugging.
Syntax debugging udp-helper { event | packet [ receive | send ] }
undo debugging udp-helper { event | packet [ receive | send ] }
Parameters event
UDP Helper event debugging.
packet
UDP Helper packet debugging.
receive
UDP Helper inbound packet debugging.
send
UDP Helper outbound packet debugging.
Default By default, UDP Helper debugging is disabled.
Example Enable UDP Helper packet debugging.
<3Com> debugging udp-helper packet
View This command can be used in the following views:
■ User view