Command Reference Guide

52 ● debugging ip urpf 3Com Router 5000 Family and Router 6000 Family
Command Reference
debugging ip urpf
Purpose Use the debugging ip urpf command to display the information on the rejected
packets by URPF.
Use the undo debugging ip urpf command to disable the function.
Syntax debugging ip urpf discards [ interface interface-type interface-number
]
undo debugging ip urpf discards [ interface interface-type
interface-number ]
Parameters interface-type
interface-number
Interface name. If not specified, it represents all the
interfaces.
Example Suppose URPF is enabled on Ethernet2/2/0, configure as follows to display the
information on the rejected packets.
<3Com> debugging ip urpf discards interface Ethernet2/2/0
View This command can be used in the following views:
■ User view