Command Reference Guide

48 ● debugging ip count 3Com Router 5000 Family and Router 6000 Family
Command Reference
debugging ip count
Purpose Use the debugging ip count command to enable debugging for the IP
Accounting module (the IP Accounting).
Use the undo debugging ip count command to disable debugging for the IP
Accounting.
Syntax debugging ip count { data | error | all }
undo debugging ip count { data | error | all }
Parameters data
Enables data procedure debugging.
error
Enables error debugging.
all
Enables all debugging.
Default By default, debugging for the IP Accounting is disabled.
Example Enable data and error debugging for the IP Accounting.
<3Com> debugging ip count all
Disable all debugging for the IP Accounting.
<3Com> undo debugging ip count all
View This command can be used in the following views:
■ User view