Command Reference Guide

42 ● debugging dhcp relay 3Com Router 5000 Family and Router 6000 Family
Command Reference
debugging dhcp relay
Purpose Use the debugging dhcp relay command to enable debugging on the
DHCP-relay module.
Use the undo debugging dhcp relay command to disable DHCP-relay module
debugging.
Syntax debugging dhcp relay { all | error | event | packet [ client mac
mac-address ] }
undo debugging dhcp relay { all | error | event | packet }
Parameters all
All DHCP-relay debugging.
error
Error debugging for DHCP-relay module.
event
Event debugging for DHCP-relay module.
packet
Packet debugging for DHCP-relay module.
client mac
MAC address of the DHCP client and only displays the
information of the specified DHCP client.
Example Enable DHCP-relay module debugging.
<3Com> debugging dhcp relay
View This command can be used in the following views:
■ User view