Command Reference Guide

3Com Router 5000 Family and Router 6000 Family debugging dhcp client ● 41
Command Reference
debugging dhcp client
Purpose Use the debugging dhcp client command to enable debugging on the DHCP
client.
Use the undo debugging dhcp client command to disable debugging on the
DHCP client. By default, DHCP client debugging is disabled.
Syntax debugging dhcp client { event | packet | error | all }
undo debugging dhcp client { event | packet | error | all }
Parameters event
Protocol events of the DHCP client, which include
address allocation and data updating.
packet
DHCP packets received and sent by the DHCP client.
error
Unknown packet information or error information.
all
Enables debugging of the DHCP client in all the
information (event, packet, and error).
Example Enable event debugging on the DHCP client.
<3Com> debugging dhcp client event
View This command can be used in the following views:
■ User view