Command Reference Guide

32 ● dchp select (System view) 3Com Router 5000 Family and Router 6000 Family
Command Reference
Default By default, DHCP packets destined to the local device will be sent to the internal
server and the clients sending them will be allocated with addresses selected from a
global address pool (in global approach).
Example Configure the interfaces in the range of Ethernet2/0/0.1 to Ethernet2/0/0.5 to
allocate addresses selected from an interface address pool maintained by the internal
server to the clients sending DHCP packets destined to the local device.
[3Com] dhcp select interface interface ethernet 2/0/0.1 to ethernet
2/0/0.5
View This command can be used in the following views:
■ System view
Related Command dchp select (Interface view)