Command Reference Guide

78 ● detect list 3Com Router 5000 Family and Router 6000 Family
Command Reference
detect list
Purpose Use the detect-list command to add an IP address to the detect group and
assign the address a detecting sequence number.
Use the undo detect-list command to remove an IP address from the detect
group.
Syntax detect-list list-number ip address ip-address [ nexthop ip-address ]
undo detect-list list-number
Parameters list-number
Sequence number for an address to be probed in the
detect group. Valid values are 1 to 100.
ip-address
IP address to be probed.
nexthop ip-address
Specifies a next hop IP address for reaching the IP
address to be probed, that is, the address where auto
detect starts.
Example Add IP address 202.13.1.55 with sequence number 1 to detect group 10, taking IP
address 1.1.1.1 as the next hop address.
<3Com> system-view
System View: return to User View with Ctrl+Z.
[3Com] detect-group 10
[3Com-detect-group-10] detect-list 1 ip address 202.13.1.55 nexthop
1.1.1.1
View This command can be used in the following views:
■ Detect Group view
Description You can add up to 100 IP addresses to a detect group and specify their relationship by
using the option command. The router probes these IP addresses in the ascending
order of their assigned sequence numbers.
Related Command option