Command Reference Guide

26 ● connection-limit default amount 3Com Router 5000 Family and Router 6000 Family
Command Reference
connection-limit default amount
Purpose Use the connection-limit default amount command to set default
threshold for connection limit.
Use the undo connection-limit default amount command to delete the
threshold.
Syntax connection-limit default amount { upper-limit upper-limit | lower-limit
lower-limit }*
undo connection-limit default amount { upper-limit | lower-limit }*
Parameters upper-limit
Sets default upper limit.
upper-limit
Default upper limit. Valid values are 1 to 4294967295.
lower-limit
Sets default lower limit.
lower-limit
Default lower limit. Valid values are 0 to 4294967295.
Default By default, the upper limit is 50 and the lower limit is 20.
Example Set the default threshold of connection limit, with the upper limit being 100 and
lower limit being 20.
<3COM> system-view
[3COM] connection-limit default amount upper-limit 100 lower-limit 20
View This command can be used in the following views:
■ System view