Command Reference Guide

3Com Router 5000 Family and Router 6000 Family connection-limit default ● 25
Command Reference
connection-limit default
Purpose Use the connection-limit default command to configure the action when
the limit policy is not available.
Use the undo connection-limit default command to delete the action.
Syntax connection-limit default { permit | deny }
undo connection-limit default { permit | deny }
Parameters permit
Performs limit, with the upper limit and lower limit
being the default value.
deny
Does not limit.
Example Configure to limit connection when the limit policy is not available.
<3COM> system-view
[3COM] connection-limit default permit
View This command can be used in the following views:
■ System view
Description The connection-limit default command can be configured repeatedly. The new one
overwrites the previous one.