Command Reference Guide

3Com Router 5000 Family and Router 6000 Family detect group ● 77
Command Reference
detect group
Purpose Use the detect-group command to create a detect group and enter its view.
Use the undo detect-group command to remove a specified detect group.
Syntax detect-group group-number
undo detect-group group-number
Parameters group-number
Number for the detect group. Valid values are 1 to
100.
Example Create a detect group numbered 10.
<3Com> system-view
System View: return to User View with Ctrl+Z.
[3Com] detect-group 10
[3Com-detect-group-10]
View This command can be used in the following views:
■ System view