Command Reference Guide

3Com Router 5000 Family and Router 6000 Family apply ip-dscp ● 13
Command Reference
apply ip-dscp
Purpose Use the apply ip-dscp command to configure to modify the packet DSCP value
matching the policy.
Use the undo ip-dscp command to delete the configuration.
Syntax apply ip-dscp { value | af11 | af12 | af13 | af21 | af22 | af23 | af31
| af32 | af33 | af41 | af42 | af43 | be | cs1 | cs2 | cs3 | cs4 | cs5 |
cs6 | cs7 | ef }
undo apply ip-dscp
Parameters value
DSCP value. Valid values are 0 to 63.
Example Configure the packet DSCP value matching ACL 2000 to 30.
<3Com> system-view
[3Com] route-policy test permit node 1
[3Com-route-policy] if-match acl 2000
[3Com-route-policy] apply ip-dscp 30
View This command can be used in the following views:
■ Route-Policy view