Command Reference Guide

3Com Router 5000 Family and Router 6000 Family ● 1
Command Reference
NETWORK PROTOCOL
ALPHABETICAL LISTING OF COMMANDS
accounting domain 6
apply default output-interface 8
apply ip-address default next-hop 9
apply ip-address next-hop
(for Multicast Policy Routing) 10
apply ip-address next-hop
(for Multicast Policy Routing) 11
apply ip-address next-hop (for Unicast Policy Routing) 12
apply ip-dscp 13
apply ip-precedence 14
apply output-interface (for Multicast Policy Routing) 15
apply output-interface (for Multicast Policy Routing) 16
apply output-interface (for Unicast Policy Routing) 17
arp check enable 18
arp security 19
arp security time-out 20
arp send-gratuitous-arp 21
arp static 22
arp timer aging 23
bims-server 24
connection-limit default 25
connection-limit default amount 26
connection-limit enable 27
connection-limit policy 28
dchp select (Interface view) 29
dchp select (System view) 31
ddns domainname 33
ddns password 34
ddns refresh 35
ddns server 36
ddns source interface 37
ddns username 38
debugging arp packet 39
debugging connection-limit 40
debugging dhcp client 41
debugging dhcp relay 42
debugging dhcp server 43
debugging dns 45
debugging ip 46
debugging ip count 48
debugging ip multicast-policy 51
debugging ip urpf 52
debugging nat 53