Command Reference Guide

366 ● x29 timer inviteclear-time 3Com Router 5000 Family and Router 6000 Family
Command Reference
x29 timer inviteclear-time
Purpose Use the x29 timer inviteclear-time command to set the delay waiting for
response after the PAD clear procedure is initiated. Upon expiration of this timer, the
server aborts the connection by force and starts X.25 clear procedures.
Use the undo x29 timer inviteclear-time command to restore the default.
Syntax x29 timer inviteclear-time seconds
undo x29 timer inviteclear-time
Parameters seconds
Delay time (in seconds) of waiting for response after
inviting PAD clear procedure. Valid values are 5 to
2147483.
If no value is specified, the default value is 5.
Example Set the inviteclear-time timer to 10 seconds.
[3Com] x29 timer inviteclear-time 10
View This command can be used in the following views:
■ System view
Description The server of X.25 PAD may send an Invite Clear message to the client, for example,
after receiving an exit request from client or in order to release the link. At the same
time, a timer is started. If no response is received upon expiration of the timer, the
server clears the link.