Command Reference Guide

3Com Router 5000 Family and Router 6000 Family x25 xot pvc ● 365
Command Reference
Example Connect PVC1 on the interface Serial0/0/0(10.1.1.1) of Router RTA with PVC2 on the
interface Serial1/0/0(10.1.1.2) of Router RTB via XOT tunnel, and then perform packet
switching.
Perform the configurations on the Router RTA.
[3Com-Serial0/0/0] ip address 10.1.1.1 255.255.255.0
[3Com-Serial0/0/0] link-protocol x25 dce ietf
[3Com-Serial0/0/0] x25 xot pvc 1 10.1.1.2 interface serial 1/0/0 pvc 2
Perform the configurations on the Router RTB.
[3Com-Serial1/0/0] ip address 10.1.1.2 255.255.255.0
[3Com-Serial0/0/0] link-protocol x25 dce ietf
[3Com-Serial1/0/0] x25 xot pvc 2 10.1.1.1 interface serial 0/0/0 pvc 1
View This command can be used in the following views:
■ Interface view
Description After configuring the XOT switching command of X.25 PVC, a user can cross IP
network from the local X.25 network to implement the interconnection with the
remote X.25 network. If a user configures the keepalive attribute, the link detection
for XOT will be supported.
Related Commands ■ display x25 vc
■ x25 switching