Command Reference Guide

3Com Router 5000 Family and Router 6000 Family destination-ip ● 75
Command Reference
destination-ip
Purpose Use the destination-ip command to configure the destination IP address in the
test.
Use the undo destination-ip command to delete the configured destination IP
address.
Syntax destination-ip ip-address
undo destination-ip
Parameters ip-address
Destination IP address in a test, which can be either an
IP address or host name.
Default By default, no destination IP address is configured for any test.
Example Set the destination IP address in the test to 169.254.10.3.
[Router-administrator-icmp] destination-ip 169.254.10.3
View This command can be used in the following views:
■ HWPing Test Group view
Related Command destination-port