Command Reference Guide

3Com Router 5000 Family and Router 6000 Family x25 vc-per-map ● 359
Command Reference
x25 vc-per-map
Purpose Use the x25 vc-per-map command to set the maximum number of VCs for
connections with the same destination device.
Use the undo x25 vc-per-map command to restore their default values.
Syntax x25 vc-per-map count
undo x25 vc-per-map
Parameters count
Maximum number of VCs. Valid values are 1 to 8.
If no value is specified, the default value is 1.
Example Set the maximum value of VCs on the X.25 interface Serial 0/0/0 to 3.
[3Com-Serial0/0/0] x25 vc-per-map 3
View This command can be used in the following views:
■ Interface view
Description If the parameter is greater than 1, and the sending window and the sending queue of
VC are filled full, the system will create a new VC to the same destination. If the new
VC cannot be created, the datagram will be discarded.
Related Commands ■ display interface
■ x25 map