Command Reference Guide

354 ● x25 timer idle 3Com Router 5000 Family and Router 6000 Family
Command Reference
x25 timer idle
Purpose Use the x25 timer idle command to set the maximum idle time of the SVC on
the interface.
Use the undo x25 timer idle command to restore its default value.
Syntax x25 timer idle minutes
undo x25 timer idle
Parameters minutes
Maximum idle time of SVC in minutes. Valid values are
0 to 255.
If no value is specified, the default is 0.
Example Set the maximum idle time of the SVC on the interface Serial 0/0/0 to 10 minutes.
[3Com-Serial0/0/0] x25 timer idle 10
View This command can be used in the following views:
■ Interface view
Description When a SVC stays idle (no data transmission) for a period (the period length is
decided by the parameter), the router will clear this SVC automatically. If this
parameter is set to 0, this SVC will be reserved no matter how long it stays idle.
The configuration of this parameter will affect all the SVCs on this X.25 interface.
Also users can set the maximum idle time for a SVC attached to this address mapping
through the option in the command
x25 map.
For PVC or the established SVC for X.25 switching, the command will be disabled.
Related Command x25 map