Command Reference Guide

352 ● x25 template 3Com Router 5000 Family and Router 6000 Family
Command Reference
x25 template
Purpose Use the x25 template command in system view to create an X.25 template and in
DLCI view to reference the template.
Use the undo x25 template command to delete an X.25 template or remove the
referenced template from the frame relay interface.
Syntax x25 template name
undo x25 template name
Parameters name
X.25 template name.
Example Create an X.25 template.
[Router] x25 template template001
Reference an X.25 template that has been created.
[Router-fr-dlci-Serial1/0/0-200] x25 template template001
View This command can be used in the following views:
■ System view
■ DLCI view