Command Reference Guide

3Com Router 5000 Family and Router 6000 Family x25 switching ● 351
Command Reference
x25 switching
Purpose Use the x25 switching command to enable the X.25 switching function.
Use the undo x25 switching command to disable this function, which will not
affect the established VC switching function.
Syntax x25 switching
undo x25 switching
Parameters None
Default By default, X.25 packet switching function is disabled.
Example Enable X.25 switching function.
[3Com] x25 switching
View This command can be used in the following views:
■ System view
Description X.25 packet switching is used to accept packets from an X.25 interface and send
them to a certain interface based on the destination information contained in the
packets. The Router can be used as a small-sized packet switch by the packet layer
switching function.
Related Commands ■ x25 pvc
■ x25 switch pvc
■ x25 xot pvc
■ x25 fr pvc
■ x25 switch svc
■ display x25 vc
■ display x25 switch-table svc