Command Reference Guide

350 ● x25 switch svc xot 3Com Router 5000 Family and Router 6000 Family
Command Reference
sub-dest
destination-address
Substitution destination address.
sub-source source-address
Substitution source address.
ip-address1 - ip-address6
Destination IP address of XOT connection, up to 6
addresses can be configured.
xot-option
XOT channel parameter option. For the specific
configuration, see the following table.
Default By default, no X.25 switching route is configured.
Example Switch SVC 1 to the destination address 10.1.1.1.
[3Com] x25 switch svc 1 xot 10.1.1.1
View This command can be used in the following views:
■ System view
Description After configuring the XOT switching command of X.25 SVC, a user can cross IP
network from the local X.25 network to implement the interconnection with the
remote X.25 network. If a user configures the keepalive attribute, the link detection
for XOT will be supported.
Related Command ■ x25 switch svc interface
■ display x25 switch-table svc
■ x25 switching
^ Cannot be placed before the symbols + and *.
Table 3 XOT channel parameter option
Option Description
timer seconds Keepalive timer delay of XOT connection. The timer sends the
keepalive packet upon timeout to detect the connection availability.
Valid values are 1 to 3600.
retry times Number of maximum retries of sending keepalive. If the number
exceeds times, the XOT connection will be disconnected. Valid values
are 3 to 3600.
source
interface-type
interface-number
Type and number of the interface that initiates the XOT connection.
Table 2 input rules of x.121 address mode matching string (continued)
Characters Input rules