Command Reference Guide

338 ● x25 receive-threshold 3Com Router 5000 Family and Router 6000 Family
Command Reference
x25 receive-threshold
Purpose Use the x25 receive-threshold command to set the number of receivable
maximum packets before X.25 sends the acknowledged packet.
Use the undo x25 receive-threshold command to restore its default value.
Syntax x25 receive-threshold count
undo x25 receive-threshold
Parameters count
The number of data packets that can be received
before previous acknowledgement, in the range of 0
to input window size. If it is set to 0 or the input
window size, this function will be disabled. If it is set to
1, X.25 of the 3Com
serial routers will send an
acknowledgement for each correct packet received.
By default, the number of data packets that can be
received on X.25 before previous acknowledgement is
0.
Example Specify that each VC on the X.25 interface Serial0/0/0 acknowledges each correctly
received data packet.
[3Com-Serial0/0/0] x25 receive-threshold 1
View This command can be used in the following views:
■ Interface view
Description After enabling this function, the 3Com series routers can send acknowledgement to
the peer router upon the receipt of some correct packets, even if the input window is
not yet full. If there is not much data traffic in users’ application environment and
users pay more attention to the response speed, they can appropriately adjust this
parameter to meet the requirement.
Related Command x25 window-size