Command Reference Guide

3Com Router 5000 Family and Router 6000 Family x25 queue-length ● 337
Command Reference
x25 queue-length
Purpose Use the x25 queue-length command to set the data queue length on X.25 VC.
Use the undo x25 queue-length command to restore its default value.
Syntax x25 queue-length queue-length
undo x25 queue-length
Parameters queue-length
Queue length (in packets). Valid values are 0 to 9999
for the Router 6000 Series Routers and 0 to 3000 for
the Router 5000 Series Routers. The default queue
length on X.25 VC is 200.
Example Set the VC data queue length of the X.25 interface Serial0/0/0 to 75 datagrams.
[3Com-Serial0/0/0] x25 queue-length 75
View This command can be used in the following views:
■ Interface view
Description When the data traffic is too heavy, you can use this command to extend the receiving
queue and sending queue of the X.25 VC to avoid data loss that may affect
transmission performance. It should be noted here that modifying this parameter
would not affect the existing data queue of VC.
Related Command x25 packet-size