Command Reference Guide

3Com Router 5000 Family and Router 6000 Family x25 map bridge ● 331
Command Reference
x25 map bridge
Purpose Use the x25 map bridge command to map an X.121 address to a bridge-set.
Use the undo x25 map bridge command to delete the configured map entry.
Syntax x25 map bridge x121-address x.121-address broadcast
undo x25 map bridge x121-address x.121-address
Parameters x121-address x.121-address
Remote X.121 address.
broadcast
Sends broadcast packets to the X.25 destination.
Default By default, no bridge-set to X.25 map is configured.
Example Configure a map entry on the X.25 interface Serial0/0/0.
[3Com] interface serial 0/0/0
[3Com-Serial0/0/0] x25 map bridge x121-address 20112451 broadcast
View This command can be used in the following views:
■ Interface view
Related Command display x25 map