Command Reference Guide

3Com Router 5000 Family and Router 6000 Family x25 local-cug ● 327
Command Reference
x25 local-cug
Purpose Use the x25 local-cug command to configure mapping from local CUG to
network CUG and define its suppression rule.
Use the undo x25 local-cug command to remove the mapping from local CUG
to network CUG.
Syntax x25 local-cug cug-number network-cug cug-number [ no-incoming ] [
no-outgoing ] [ preferential ]
undo x25 local-cug cug-number
Parameters local-cug cug-number
Number of local cug.
network-cug cug-number
Number of network cug.
no-incoming
Suppresses incoming access.
no-outgoing
Suppresses outgoing access.
preferential
Suppresses the CUGs configured with preferential.
Default By default, no suppress rule is defined.
Example Define the rule on the serial interface Serial0/0/0: the incoming calls with 100 local
CUGs or 200 network CUGs are denied.
[3Com-Serial0/0/0] x25 cug-service
[3Com-Serial0/0/0] x25 local-cug 100 network-cug 200 no-incoming
View This command can be used in the following views:
■ Interface view
Description Two types of CUG suppression policies are available. One it to suppress all incoming
calls, where the system removes the CUG facilities of all incoming calls with CUG
facilities. The other is to suppress the incoming calls matching the mapping specified
as preference rule, where the system removes the CUG facilities only of those
incoming calls matching the mapping specified as preference rule, but lets other
incoming calls with CUG facilities pass through.
Related Commands ■ x25 call-facility
■ x25 cug-service