Command Reference Guide

3Com Router 5000 Family and Router 6000 Family x25 ignore called-address ● 325
Command Reference
x25 ignore called-address
Purpose Use the x25 ignore called-address command to enable it to ignore the
X.121 address of the called DTE when X.25 initiates calls.
Use the undo x25 ignore called-address command to disable this function.
Syntax x25 ignore called-address
undo x25 ignore called-address
Parameters None
Default By default, this function is disabled.
Example Specify the call request packet from the X.25 interface Serial0/0/0 not to carry the
called DTE address.
[3Com-Serial0/0/0] x25 ignore called-address
View This command can be used in the following views:
■ Interface view
Description According to X.25, the calling request packet must carry the address bits. However,
on some occasions, the X.25 calling request does not have to carry the called/calling
DTE address in a specific network environment or as is required by the application.
This command enables users to specify whether the call request packet sent by X.25
in the 3Com series routers carries the called DTE address.
Related Commands ■ x25 response called-address
■ x25 response calling-address
■ x25 ignore calling-address